Purchasing process:
I received an order tracking number three days after purchase. The package came well packed in two separate boxes. Everything was included as well as additional spare parts.
Setup:
Setup took about 4-5 hours over a few days for me. The pulleys come pre installed, but installation took me longer because I took all the pulleys apart and greased them with silicon grease. This makes them spin much smoother since they are a bit dry out of the box. The instructions were clear and straightforward, but you have to make sure you pay attention to the exact parts and orientation of the parts when installing. There are two tricky parts to the installation process for me. (1) there is a bolt at the top that is impossible to get in if you do not install it in the correct order due to the location of the welded plate housing. You first need to thread this bolt through the l—plate while the I plate is rotated upside down. Once the bolt it through, you need to rotate the plate counterclockwise so that it is in the correct position. After this, the other three bolts will slide in easily. I’ll post a photo of this specific tricky bolt. (2) the other tricky installation part was threading the cable. There is a video on eonfit’s instagram that shows an easier way to do it by starting from the center pulley. Other than that, installation was an easy but tedious. I would highly recommend greasing everything.
Performance:
The machine is well made, and feels solid. The cable pull is smooth even without the aluminum pulley upgrade. There are a ton of different moves I can do on this machine that will make workouts more dynamic and help work back, arms, and more.
Eonfit® E1 2.0 Wall Mounted & Free Standing Cable Machine for Home Gym, LAT Pulldown, Functional Trainer, Cable Crossover Machine Workout Station Pulley System Cable Tower with Leg Holder, LAT Bar, Foot Board Accessories
JackG
Great Value Cable Tower
I ordered this cable tower last week and it took about 3 days to process. I received a confirmation email and tracking number 3 days after ordering.
The tower came well packaged in two different boxes, and everything was in the box including extra hardware.
The cable tower has great build quality, although I recommend picking up some silicone lube to grease up the pulleys, uprights and weight trolley since they are pretty dry. You will notice a huge difference in the smoothness of the system by applying silicone lube generously.
Installation was fairly average. Not simple, but not overly complicated. It took me about 5 hours total over a few days. The pulleys come pre installed, but I had to remove them to grease them up which added some extra time to the installation. Two minor issues with installation. (1) there is a bolt that is tricky to get in due to where the welded plates are. I will add a photo of this specific bolt. You need to thread this bolt through the L-plate first, put the bolt in with the l-plate upside down and then rotate the l-plate counterclockwise into place. After that, you can add the other three bolts easily. (It takes a bit of work, but it all fits eventually). (2) the cable installation is a bit confusing. There is a blurry video on EonFits’s instagram that is better than the directions. I’d start with the middle like the video instead of at the ends like the directions show. Last bit of advice- don’t tighten the bolts until the very end. It’s useful to have a bit of wiggle room so all the holes line up. Once everything is in place, then you can tighten all the bolts.
All in all, the system is well made, smooth, and I would highly recommend.
Eonfit® E1 2.0 Wall Mounted & Free Standing Cable Machine for Home Gym, LAT Pulldown, Functional Trainer, Cable Crossover Machine Workout Station Pulley System Cable Tower with Leg Holder, LAT Bar, Foot Board Accessories
Jorge Cervantes
Great budget rack.
Just wanted to let people know that for the price this rack is great! Will recommend to anyone that is on a budget and wants to get a good workout. I will be updating this rack by adding the smith machine. Also make sure you upgrade to aluminum pulleys, mine arrived with plastic pulleys and then got them after and I can let you know that it makes a big difference.
EonfitOmni® E2 2.0 Power Rack for Home Gym Equipment
Chevy Exshaw
Love it
Love it. Working great. 360 cable arms working great. Worth getting the aluminum pulleys
EonfitOmni® E3 2.0 Smith Machine
Jeff
Very Nice cable tower!
Parts arrived within a week in 3 separate boxes. All were extremely well packaged, all parts were included, as well as extra parts they send.
Assembly was not challenging and directions were accurate and well written.
Online CHAT n the Eon website was excellent and they are very responsive (I had questions before making my purchase)
Enjoying the machine very much. Can do many different exercises with it.
Highly recommend.
Eonfit® E1 2.0 Wall Mounted & Free Standing Cable Machine for Home Gym, LAT Pulldown, Functional Trainer, Cable Crossover Machine Workout Station Pulley System Cable Tower with Leg Holder, LAT Bar, Foot Board Accessories
